The following problems are being addressed by the CADAM Drafting Development and Support organization. For additional information on any of these problems, please e-mail
us.
TR# |
Rel. Rep. |
Description |
Rel. Sch. |
Status |
| C1864 |
V5R21 |
Overplot is not available on the Windows version of CCD when remote plotting. |
|
In development |
| C1865 |
V5R21 |
Zero length dimensions are made out-of-scale |
|
In development |
| C1863 |
V5R21 |
Specific cut/paste scenario with a dimension crashes |
V5R21 SP2 |
Released |
| C1862 |
V5R21 |
FK Group, /TRAP/, /STRETCH/ crashes in certain situations. |
V5R21 SP2 |
Released |
| C1861 |
V5R21 |
Selecting multiple files in EFT hangs on Windows 7. |
V5R21 SP2 |
Released |
| C1859 |
V5R20 |
When converting to DXF, some very small arcs are translated as full circles. |
V5R20 SP4 |
Released |
| C1854 |
V5R20 |
Select->Copy crashes on models with multiple raster images. |
V5R20 SP4 |
Released |
| C1855 |
V5R20 |
Multi-byte input with the special character window up can produce unpredictable results. |
V5R20 SP4 |
Released |
| C1856 |
V5R20 |
Overlay family cannot be opened after a specific scenario. |
V5R20 SP4 |
Released |
| C1857 |
V5R20 |
Part field display is cropped with certain characters/fonts. |
V5R20 SP4 |
Released |
| C1858 |
V5R20 |
Underscores are not visible in the part field display area. |
V5R20 SP4 |
Released |
| C1852 |
V5R20 |
File is saved with .CDD extension instead of .cdd if TO UPPER is set in cadprof. |
V5R20 SP3 |
Released |
| C1850 |
V5R19 |
Out-of-scale and note reference dimensions are not translated to DXF/DWG if they have no text. |
V5R20 SP3 |
Released |
| C1843 |
4.2.5 SP2 |
Performing relative analysis between a multiline and a line crashes. |
4.2.5 SP3 |
Released |
| C1846 |
V5R19 |
Preselect highlighting is not always released. |
V5R20 SP2 |
Released |
| C1844 |
V5R19 |
Copy-paste operation on certain isometric views crashes. |
V5R20 SP2 |
Released |
| C1829 |
V5R19 |
The 'Relimit both ends' function leaves an unlimited line if the function is exited prior to completion. It should work the same as /ENDS/ in this case. |
V5R20 SP1 |
Released |
| C1830 |
V5R19 |
When translating Helix models in a native Traditional Chinese environment, text is not translated correctly. |
V5R20 SP1 |
Released |
| C1831 |
V5R19 |
The FK Note functions /VOICE/ and /ALIGN/ are not documented. |
V5R20 SP1 |
Released |
| C1832 |
V5R19 |
Provide a Japanese translation for the FK Note main menu. |
V5R20 SP1 |
Released |
| C1833 |
V5R19 |
CCD license is not being released immediately upon CCD closure. |
V5R20 SP1 |
Released |
| C1834 |
V5R19 |
FK Bar text is too large, causing the bottom of the bar to be cut off in many cases. |
V5R20 SP1 |
Released |
| C1837 |
V5R19 |
Plot fails when plotting a specific overlay family. |
V5R20 SP1 |
Released |
| C1838 |
V5R19 |
Double-byte strings are incompletely translated by EFT in certain models. |
V5R20 SP1 |
Released |
| C1839 |
V5R19 |
Certify and document the Absoft Fortran V11.0 compiler for use in developing IUE programs. |
V5R20 SP1 |
Released |
| C1841 |
V5R19 |
Circles with excessively large start and end angles to not detail-copy correctly. |
V5R20 SP1 |
Released |
C1825 |
V5R19 SP2 |
Japanese entries in cadprof and the plotter table display incorrectly when the Ja_JP directory is removed.
Closure information: The language used to interpret these input fields is determined by the resource file(s) being used. Therefore, if Japanese characters were used in these fields, it is important to keep the Japanese resouce files. If a customer running Japanese Windows wishes to use English menus and menus in CCD, they can delete the Ja_JP/msgfils folder, but they should not delete or rename the Ja_JP/res folder or any of the files contained within that folder.
|
No fix |
Closed |
C1827 |
V5R19 SP2 |
Remote plots fail after the first plot |
V5R19 SP3 |
Released |
